Plans and diagrams
Electrical floor plans, single-line diagrams, schematics, panel schedules, and record drawings.
Electrical engineering & design
Electrical engineering services for existing buildings, renovations, and service connections.
Electrical drawings, load calculations, distribution design, panel schedules, record drawings, and technical support for commercial and residential projects in Ontario.
Scope of service
Electrical engineering consulting
AMP Power Solutions provides electrical engineering consulting throughout Ontario. Services include electrical drawings, load calculations, distribution design, panel schedules, and project support.
Loads and distribution
OESC load calculations, demand analysis, service sizing, feeder design, and voltage-drop calculations.
Review and coordination
Site review, drawing review, contractor coordination, inspector comments, and regulatory submissions.
Residential projects
Residential service load calculations
For multiplex residential projects, we prepare a utility service connection single-line diagram and an OESC load calculation based on the available architectural and mechanical information.
Core deliverables
- Residential load calculation in accordance with applicable OESC requirements
- Utility service connection single-line diagram
- Summary of calculated service demand
Information reviewed
- Architectural plans and unit layouts
- Mechanical equipment schedules and heating information
- Major appliance and amenity loads
- Available utility or service requirements
Focused scope: This service covers the utility connection single-line and load calculation. Permit or construction drawing packages can be scoped separately where required.
Commercial projects
Commercial tenant fit-outs
Electrical design for restaurants, dental clinics, medical offices, retail spaces, light industrial facilities, and other tenant improvement projects.
Design scope
- Electrical load calculations and service sizing
- Power distribution plans and panel schedules
- Lighting layouts and fixture specifications
- Equipment circuit design for commercial kitchens
- Dental equipment power and control planning
- OESC compliance review
- Permit drawing packages and engineering seal where required
- Coordination with ESA and building inspectors
Typical applications
- Restaurant and commercial kitchen fit-outs
- Dental clinic installations
- Medical and professional offices
- Retail spaces and storefronts
- Light industrial and workshop spaces
- Brewery and food production facilities
Contractor coordination: We coordinate with electrical contractors, landlords, consultants, and building departments through the design and construction process.
Controls
Control panel design and engineering
Control panel design for equipment, machinery, process systems, and building systems, from single-machine controls to multi-panel installations.
Design services
- Single-line and schematic diagrams
- Panel layout and component arrangement
- Wire sizing and protective device selection
- Motor control and VFD integration
- PLC and control system integration
- Safety circuits and interlocks
- Terminal and connection diagrams
- Bill of materials and component specifications
Applications
- Equipment control panels
- Process control systems
- HVAC and building automation panels
- Pump and motor control centres
- Custom machine controls
- Retrofit and upgrade projects
- Obsolete control replacement
Documentation: Panel designs can include electrical schematics, panel layouts, wire lists, component specifications, PDF drawings, and CAD files. Designs are sealed by a licensed engineer when required.
Distribution
Power distribution and single-line diagrams
Electrical distribution design and documentation for commercial and light industrial facilities, permit applications, inspections, renovations, and equipment additions.
Design deliverables
- Single-line diagrams
- Load calculations and demand analysis
- Service entrance sizing
- Distribution panel schedules
- Feeder and branch circuit design
- Protective device coordination
- Voltage-drop calculations
- Short-circuit and arc-flash studies where required
Applications
- New service installations or upgrades
- Building permit applications
- ESA inspection requirements
- Major equipment additions
- Facility expansions and renovations
- Insurance or compliance audits
- Equipment procurement specifications
Code basis: Designs are prepared to applicable Ontario Electrical Safety Code and Canadian Electrical Code requirements.
Existing facilities
Record drawings and reverse engineering
Record drawings document accessible and visible site conditions where existing electrical drawings are missing, incomplete, or no longer match the installation.
Field review
Site review can include accessible electrical rooms, panels, distribution equipment, equipment connections, and visible devices. Field labels are cross-referenced to the drawing set.
Typical deliverables
- Electrical floor plans
- Panel schedule recreation or updates
- Basic service and distribution single-line diagrams
- Equipment and circuit identification
- PDF record drawing package
Basis of record: Drawings identify the field observations, available information, and access limitations that form the basis of the record set.
Technical review
Design review and engineering consultation
Review and consultation services are available for existing designs, installations, code questions, project planning, and electrical equipment matters.
Drawing review
Review of electrical designs for code compliance, constructability, and coordination, with written comments where requested.
Code compliance review
Assessment of installations or designs against applicable OESC and CEC requirements.
Technical consultation
Consultation for technical questions, troubleshooting support, equipment issues, and project planning.
Project sequence
Engineering process
Initial review
Review project requirements, existing records, site conditions, and regulatory requirements.
Scope
Define deliverables, assumptions, schedule, fees, and required information.
Design
Prepare drawings, calculations, schedules, and specifications for review.
Submission
Finalize and seal the engineering package where required for submission.
Follow-up
Respond to contractor, utility, inspector, or client questions during implementation.
Have an electrical project to discuss?
Send the available drawings, site information, or a description of the work.
Request a consultation